Full Body Torso Doll UAE - 42 cm, 5.5 kg

Most torso mouldings in this size range are a hip and a channel, and the only thing above the waist is a seam where the moulding ends. This one carries the figure all the way up: neck and shoulders, full breasts with areolas and nipples, an S-curve waist with a navel, then a rigid shaft and testicles below, and a pair of perky buttocks at the back. What it deliberately leaves off is a head, a pair of arms and everything below the thigh stumps.

That last decision is the one worth thinking about before anything else. Without a head or arms there is nothing staring back at you and nothing flopping around while you handle it, and the moulding stays liftable at a weight that a full doll could not match.

The supplier's own spec card is the source for every figure below, and the same numbers read straight off the printed card in the second photograph. Overall it measures 420 mm / 16.54 in from the top of the neck to the bottom of the thigh stumps. Bust is 560 mm / 22.05 in, waist 320 mm / 12.60 in, hips 550 mm / 21.65 in, and the base footprint is 280 mm / 11.02 in deep by 230 mm / 9.05 in wide.

What those numbers mean in practice: the 280 mm base is what decides where it can sit, because a footprint that deep needs a bed or a firm mattress rather than the end of a chair. The 420 mm height puts the breasts roughly level with a partner lying beside it rather than above them. And the shaft is printed at 155 mm / 6.10 in with a 50 mm / 1.97 in glans, which is a length you can compare directly against anything you already own.

5.5 kg / 12.13 lb is the net weight, printed as N.W.: 5.5KG/12.13LB. That is the figure that turns the doll from a display object into a handling decision: it is heavy enough to stay where you put it on a bed and light enough to lift into place with both hands, which is the reason supporting it under the waist matters more than reaching for the breasts or the shaft when you move it.

The front channel is under the scrotum, and the supplier's own photographs show a dildo going into it with ring-shaped ridges visible inside on a separate close-up. That dildo is a prop from the supplier's shoot and is not in the box. A second, wrinkled opening sits behind the front one; the supplier never describes it, so this page does not claim a length or a use for it.

This shemale torso doll suits anyone who wants the shape to be complete from the chest down and would rather trade a head and arms for something they can actually lift. It is not for anyone who wants a full-body doll, and it is not for anyone shopping for something to keep permanently on display: without a head it reads as a moulding, however detailed the rest is.

The supplier names no compound for this moulding, neither silicone nor TPE, so that is stated as an absence rather than guessed. The practical consequence is a care routine built around what can be seen: a soft flesh-tone surface that takes a visible dent when squeezed, warm rather than hot water, and water-based lubricant only, since no grade is printed for the material.

What goes first on a moulding like this is the rim of the front opening, which stretches every time you enter it, and the creases where the thighs join the hips, which are the hardest places to dry. Rinse warm water and a mild toy cleaner through the channel from the inside out, dry it with a soft cloth before drying the breasts and buttocks, and check the opening edge for a tear after each session.

Stored flat on a shelf, it holds its shape; left leaning against a wall it takes a lean. Keep it out of direct sunlight, do not let anything rest against the breasts or the shaft for long periods, and dust it lightly if the surface starts to feel tacky.

It arrives from our UAE warehouse in the UAE in a plain outer parcel with nothing on the outside naming what is inside, delivery covers all seven emirates and reaches Dubai the next working day, and cash on delivery is available at the door.