Vibrating Two Hole Masturbator – Vibrating Masturbator Cup UAE – 2-in-1 Dual Entry Stroker

This vibrating masturbator cup is a 200 mm white barrel with two entries: a soft oral mouth end and a tighter vaginal end, both feeding one flesh-tone sleeve inside. A motor in the barrel turns the sleeve as it vibrates; the work is not left to a hand.

At 650 g and 85 mm across it stays manageable in one hand, and the two controls sit midway along the barrel, within reach of the thumb. The suction base presses onto a smooth, flat surface — a dining table, a desk, a tiled floor or a bathroom wall — and tilts to set the angle, which is what makes hands-free use possible.

Charging is over Type-C, with 3.7V 1A printed on the barrel. No charge time, battery capacity or runtime is published for it, so none is claimed here. Rinse the sleeve ends under warm water after use, keep water off the controls and the port, and let both ends air-dry before the barrel is closed up.

Orders ship from the UAE in a plain, unmarked parcel. Cash on delivery is offered on eligible orders.

Two entries, one sleeve. A 200 mm white barrel carries a soft oral mouth at one end and a tighter vaginal opening at the other, and both feed into a single flesh-tone sleeve inside. That shared sleeve is the reason to buy this rather than two separate strokers: you get two sensations from one object to store and clean, and switching ends takes a second rather than a wash.

The motor spins the sleeve as well as vibrating it, so the motion is rotation rather than vibration on its own — a different feel from the vibrating cups that only shake. It runs on Type-C, with 3.7V 1A printed on the barrel, which means a standard phone charger works and you do not need to keep a proprietary lead.

650 g and 85 mm across. That weight is enough to sit stable on a surface without being awkward to hold, and two controls sit midway along the barrel where a hand naturally falls rather than at the end. The suction base grips flat surfaces and tilts, so the angle can be set for hands-free use instead of being fixed by how you hold it.

The care routine is the one that decides how long a sleeve lasts. Warm water and mild soap through both ends, a full dry standing upright so water drains out rather than pooling at the base, and renewing powder if the surface turns tacky. Never fold it for storage — a crease in the sleeve becomes a weak point, and weak points become tears.

The two ends are a genuine choice rather than a gimmick, because the difference between an oral mouth and a tighter vaginal opening is a difference in pressure rather than in appearance. The mouth end is softer and wider at the entry; the other is tighter from the first centimetre. Both lead to the same internal sleeve, so what changes is the entry you feel rather than the texture behind it — and knowing that is worth more than any claim about which is better.

Rotation plus vibration is a combination that reads as more intense than either alone, and it is worth being honest that not everyone wants both at once. The spin is what produces the sensation of movement; the vibration adds a layer on top. If you have only used vibrating cups before, expect this to feel busier rather than simply stronger, and start with the rotation at its lowest setting.

Type-C at 3.7V 1A is deliberately unremarkable, and that is the point: any standard phone charger will do, and you will not be hunting for a proprietary cable in a year. A full charge takes a couple of hours; the device runs for several sessions on one.

The suction base is what makes hands-free use possible, and it needs the right surface — flat, smooth and non-porous. Tile, glass and lacquered furniture hold; fabric, painted plaster and anything textured do not, and no suction base works on them. Clean the surface, dampen the cup slightly, press and hold for a moment before letting go.

Store it upright so any residual water drains out of the barrel rather than sitting at the base, where it will eventually reach the motor housing.